
Suspension Bridge Cable Solutions
Suspension bridge cable systems designed for long-term asset management
Suspension bridge main cables are difficult to inspect and cannot easily be replaced. VSL proposes a different approach that places asset management at the heart of cable-system design and ensures continuity of its structural function throughout the bridge’s service life.
For new bridges, the approach integrates monitoring, inspectability and replaceability from the outset.
For existing bridges, VSL offers retrofit solutions that restore or increase load-bearing capacity, improve maintainability and preserve the bridge’s overall geometry and architectural character.
What is the VSL suspension bridge cable solution?
- A redesigned hanger interface. In conventional suspension bridges, hangers are perpendicular to the deck and meet the main cable at an angle. VSL reverses this arrangement: hangers are perpendicular to the main cable and the angle occurs at the deck, where it can be managed using VSL’s proven cable-system expertise.
- Individually protected strands. Each strand is protected and anchored independently in a modular configuration, improving corrosion protection, and simplifying inspection and maintenance. Individual strands can be monitored and replaced without disturbing neighbouring strands.
The role of VSL’s suspension bridge cable solution
For bridge owners, maintainability also relies on the long-term availability of replacement components and installation equipment.
The system therefore favours modular, repeatable elements and strand technology with a well-established supply chain. VSL’s role as a specialist is to manage compatibility, qualification and sourcing as technologies evolve over the life of the asset.
Individual strands remain clearly distinguishable and the system is designed to support robust remote monitoring, reducing the need to introduce intrusive access such as suspended scaffolding simply to establish the condition of the cable.
The monitoring system can combine established, accessible technologies such as load cells and accelerometers to gather the key data required to track cable behaviour over time.
Replaceability starts by breaking the load-bearing system down into independent elements. Each strand is individually anchored and can be worked on without mechanically disturbing neighbouring strands.
This makes it possible to intervene on one load-bearing element rather than treating the main cable as a single unified component.
The concept can be integrated into the design of new suspension bridges and adapted to existing structures through retrofit. In both cases, the objective is to safeguard the bridge function over time while making the cable system more easily inspected, managed and maintained.
Retrofitting existing suspension bridges is possible, too!
For owners of existing suspension bridges, deterioration, evolving standards or changes in use can trigger new capacity requirements. VSL offers retrofit solutions that increase the load-bearing capacity of a bridge by adding tensile elements to the existing main cable system through dedicated anchoring zones, deviators and brackets.
This approach can compensate for cable deterioration, support compliance with current requirements or accommodate new uses, while enabling future inspectability and maintainability without fundamentally changing the bridge’s geometry or architecture.
Services
VSL combines cable-system engineering, specialist bridge construction and lifecycle expertise to support the development and implementation of suspension bridge cable systems from concept through operation.
Bridge design & engineering
Cable-solution engineering and detailing
Construction engineering and installation
Inspection, monitoring and maintenance
Retrofit of existing suspension bridges
Why choose VSL
Bridge lifecycle expertise
VSL combines new-build cable engineering with inspection, maintenance, repair and retrofit expertise, supporting asset owners throughout the life of the structure.A durability concept that addresses the source of cable-system vulnerability
The system is designed to reduce interfaces and friction mechanisms that can create unfavourable local conditions for steel wires or strands. Durability is treated at system level, together with monitoring and replacement strategy.A cable concept designed around continuity of service
VSL considers inspection and replacement requirements as part of the cable-system design rather than as future maintenance constraints. The underlying engineering philosophy is simple: structural elements subjected mainly to compression or bending can often be repaired, whereas critical tensile elements should be designed so that they can be replaced when needed.Expertise in parallel-strand cable technology
VSL draws on decades of experience in strand systems, anchorages, corrosion protection and cable-supported structures. The individual technologies and components involved have already been used by VSL in demanding structural and environmental conditions, providing a strong technical foundation for their application to suspension bridge cable systems.
FAQ about Suspension Bridge Cable Solutions
In a suspension bridge, the deck is supported by vertical hangers connected to a main cable, also called a catenary cable. In a cable-stayed bridge, the deck is connected directly to the towers by stay cables, without an intermediate main cable.
Major transport infrastructure projects, particularly new rail links, increasingly require very long-span crossings. At the same time, asset owners must reduce whole-life carbon and anticipate long-term maintenance. Cable-stayed bridges reach practical span limits at around 1,000 metres. Beyond this, suspension technology is often the only viable solution. VSL therefore aims to make suspension bridge cables inspectable, monitorable and replaceable, from construction throughout the bridge’s service life.
Traditional main cables are made of many wires working together as one structural system, with hangers commonly connected through friction-based clamps. This means individual load-bearing elements cannot readily be isolated and replaced independently. If major deterioration affects the cable system, intervention becomes extremely complex and can ultimately put the future of the bridge itself at risk.
In conventional suspension bridges, the hangers are generally perpendicular to the deck and therefore meet the main cable at an angle. This angled interface creates challenges for durability, inspection and component replacement.
The VSL concept reverses this arrangement: the hangers are positioned perpendicular to the main cable, and the angular interface is transferred to the deck. VSL can manage this angle using proven cable-system expertise gathered over more than 50 years. Combined with individually protected and anchored strands, this configuration means each load-bearing element can be identified, monitored and replaced without mechanically disturbing neighbouring strands.
Replaceability lies at the heart of VSL’s technology vision, across cable systems, post-tensioning and other structural solutions. This approach is backed by extensive experience with parallel strands, anchorages, corrosion protection, cable-supported structures, specialised installation and heavy lifting. VSL has deployed these technologies and methods on major infrastructure projects worldwide, including under demanding structural and environmental conditions.
Yes. Replaceability is one of the concept’s core design objectives. Each protected strand is independently anchored, allowing individual load-bearing elements to be replaced without mechanically disturbing neighbouring strands or treating the main cable as a single component. Replacement operations can also be carried out under traffic, eliminating disruption to bridge operations and any resulting impact on the revenue generated directly or indirectly by the asset.
Cable geometry, hanger interfaces, anchorage arrangements and force-transfer principles determine whether a component can later be isolated and replaced. Considering this from the outset avoids embedding maintenance constraints that are extremely difficult to overcome once the bridge is in service.
Yes. Replacing an existing main cable remains a highly complex and critical operation. However, retrofitting the bridge with an additional VSL cable system is considerably more straightforward. This approach adds load-bearing capacity to the existing system. The detailed solution depends on the bridge configuration, the condition of the original cable and the objective of the intervention, such as compensating for deterioration, meeting current requirements or accommodating a change of use.